Single-phase Pneumatic diaphragm pump

Sibgle-phase pneumatic diaphragm pump technical parameters:Working pressure :0.250.6MpaMaximum transmission viscosity: 1000 centipoiseMedium import and export connection thread: G1/ 2The intake connecting thread: G1 1/2 "or G1 1/4"Biggest suction: six metersSingle-phase pneumatic diaphragm pumps is professionally applied for printing machinery.1.This product uses compressed air as a driving force, through the needle valve to regulate the air conditioning, to make diaphragm generated movement for the purpose of transmission fluid.2. no spark, suitable for explosion-proof places.3. Low gas consumption, medium flow process stepless speed regulationthrough the compressed air.4. Diaphragm uses corrosion resistant material, can convey various corrosive medium.5. Low failure rate, easy installation and convenient maintenance.6. The pump shell adopts the high quality alloy materials, interior parts adopt stainless steel and copper, to guarantee the advantage of light weight, elegant appearance, not rust, corrosion resistance, etc.7.The product is suitable to ink, ethanol, toluene, acetone, glue, coating, acid and alkali, etcInstallation method and the matters needing attention:1. the pump must be installed vertically, pay attention to the direction of arrow2.The ink mouth should connection with hose.3. after the completion of the work, it need water or other decompose media to wash pumps, cleaning should process in operating condition.Note:When replace diaphragm, please place the pump body to drill press and other equipment, then unloaded the six M5 hex screws, lesting the spring jumped out.